Are you looking for an outdoor activity bike which has good battery durability but the performance is average? Based on the better stability which is fit for the hikes, mountain bikes could be the best option to meet with your needs. But, if you ride the bike with the noticeable frequency you may face difficulty fixing a deflated tire. To be honest, changing a bike tire does not seem to be like lilies and roses. However, this could create a more problematic scenario if the rider has less knowledge about changing a mountain bike tire.So, if you are looking for some tips suggestions or advice on how to change a mountain bike tire then you are in the right place to search your queries!
Follow the easy step to the process
Phase 1, you need to remove the previous tire.
Phase 2, remove the tube
Phase 3, the inner tube should be replaced on a place
Phase 4, fix the tube onto the wheel
Besides, a pump, a new tube, tire levers will need to replace a bicycle tire.
Required Equipment for Changing MTB Tire
We generally require the tools below to change bike tires:
● Repair stand (if available).
● Tire levers, ie; TL 1.2, TL 5, etc or a multi-tool lever.
● Air pump (floor or hand pump).
● Patch Kit (VP-1 or GP-2).
● Wrench to loosen outer axle nuts.
Table of Contents
- 1 Follow The Step How to Change A Mountain Bike Tire
- 1.1 1. Remove the previous tire
- 1.2 2. How to change a tubeless mountain bike tire
- 1.3 3. Inner tube should be replaced on a place
- 1.4 4. Change a rear tire on a mountain bike
- 1.5 5. Check and clean the inside of the tire
- 1.6 6. Locate the holes or tears in the tube
- 1.7 7. Patch the holes using the bike tire patch kit
- 1.8 8. Fix the tube onto the wheel
- 1.9 9. Last Step Pump up your new tire.
- 2 Conclusion
Follow The Step How to Change A Mountain Bike Tire
1. Remove the previous tire
At first, you need to flatten the tire. Then you have to lose the nuts and unscrew the bolts holding the axle in place first. If losing the nuts finds your difficulty you can use any sort of oil to make it easy.
The second step is to release the brakes helping with tug cable from the socket.
The third step is to remove the wheel from the frame. If you have rear-wheel then you can adjust the chain to the smallest gear and you can easily unscrew them.
2. How to change a tubeless mountain bike tire
To change a tubeless mountain bike tire, you have to deflate it first. Many bikes have the valve to release the air from inside but if you do not find any valve then you can remove the top part of the stem. Continue to remove the tire by squeezing it so that the rim could be out easily from the bicycle. After removing the tire out you have to check whether any damage has caused to tube. To testify the point where the object has been placed you have to simply fill the tube with some air and put it into a basin of water. If the air bubbles are escaping then you can locate the object that could have damaged your tube.
3. Inner tube should be replaced on a place
Replacing the new tube or fixing the damaged tube is completely upon you. By applying any strong glue you can fix it and let them dry completely. Another thing is, if you choose to replace the tube then you can use a small air of pump which will add extra volume to your tire and better for an easy drive.
4. Change a rear tire on a mountain bike
Removing the rear tire is not that much tough if the proper steps can be followed. People should know about how to change a rear tire on a mountain bike and when to replace mountain bike tires.
The first step is to shift onto the small cog and small chain ring so that the chain is on the smallest rear cog. After that, shift the levers lift the bike and pedal by hand to shift the chain.
The next step is how to change a mountain bike tire with disk brakes. Usually, most of the bikes have rim brakes but the function of disk brakes is similar to the rim brakes. The brake needs to be adjusted close to the rim.
On most of the bikes, the tire bumps into the brake pads automatically because the brake needs to be closed to the rim. This will happen when the inflated tire is wider enough than the rim. However, you can open side-pull brake and as a result, the little lever will quickly release the brake pads. However, in the case of linear pulls, a ribbon looks like “noodle" will come out from the holder.
Another technique to let the air out of the tire until you can pinch it enough or squeeze it. You can do so if you are unable to find the brake pads.
Lastly, put the derailleur back on the hand. The chain will be out of the way so that the wheel won't hang up on anything. This is the secret method of removing the wheel.
5. Check and clean the inside of the tire
Cleaning a bike tire is not a tough task at all when its easy to identify the problems. It guides us to plan how we fix the problems. The spring-cleaning is quite helpful to have good performance and problem identification.
6. Locate the holes or tears in the tube
Putting a defective tube in a bucket full of water or bring near to lips will help to detect the inflated tube. In water there will be bubbles and while near the lips it will make hissing sound which is very helpful.
7. Patch the holes using the bike tire patch kit
After identifying the hole properly, we should clean, dry and rough up the surface, then spread glue and for it to become tacky. Then pressing the patch down and holding will do the rest tricks. More or less, other patching tricks are similar.
8. Fix the tube onto the wheel
Before placing the valve stem, make sure it is centered correctly or else it could end up being damaged with frequent use. After that don't forget to screw the nuts onto the axle. Try to connect it to the brake cables. Finally just give a double-check, whether you've put the tire in a central place and whether brakes are working or not.
9. Last Step Pump up your new tire.
Tips and advice
Changing the mountain bike tire is not a hard task only if the rider has great knowledge about the changing method bicycle tire. However, following some easy tips could make your work more smooth and convenient.
- 1Work carefully when you removing the tires
- 2Place the tube in the right place to avoid any kind of accident.
- 3Never use a tire more than seven years older.
- 4Don't use excess oil to the brake otherwise, the rubber of the brakes will decay.
- 5When you replacing any new tube make sure whether any leaks have occurred.
- 6Use the advised pressure according to the tire or else it will inflate your tube.
- 7Try to use talcum powder before inflation.
- 8Keep away the tire from any heat and hot objects.
Mountain bikes are getting popular among all the ages of people. Since the riding is always based on practices along with maintaining some cautions, a rider should follow all the nitty-gritty details about changing a tire. In above, all the solutions and suggestion is given in a possible convenient way.